Simple Script Code.

pantsmonkey · Post by **pantsmonkey** » Tue Apr 19, 2005 1:51 am

Hello guys.

I am after the lines of code required for the following.

Copy Selected area to clipboard.

Paste Selection from clipboard.

I have searched but must be using incorrect wording.

It appears that

Press ctrl + V doesnt work Wish it did

thanks

Bob Hansen · Post by **Bob Hansen** » Tue Apr 19, 2005 4:32 am

Here is a rough general skeleton:

WaitWindowOpen>WindowName*
SetFocus>WindowName*
Press Tab as needed to source location
Select text
Press CTRL
Send>c
Release CTFL
Press Tab to as needed to destination location
Press CTRL
Send>v
Release CTRL

That was a stripped down version all in the same window with fields that you could move to with Tab key. Selecting text may differ on what you want, the full line, first 5 chars, middle 7, etc. so you will have to make the entries to do the selection. You may use Up/Down vs. Tab, etc.

pantsmonkey · Post by **pantsmonkey** » Tue Apr 19, 2005 6:03 am

Cheers again bob.

I was positive that was the case it just seems to be an issue on each of the machines ive tried it on. with excel